|
| Back to Search | |
|
Hose  |
- Stanley 75' X 5/8", PVC, 500 PSI and "Crush Proof". This hose will not kink or mark boats. 5 Year Warranty. $80 Purchased September 3, 2022
|
| Maintenance |
- Wipe down outside of hose. from time to time
|
- Avoid cross "threading" fittings
|
- Drain during winter months
|
Nozzles  |
- Orbit Nozzles Aluminum, encased in rubber, swivel connection to prevent "kinking", two moving parts, 2 Year Warranty, $11.50. each Purchased September 3, 2022
|
| Maintenance |
- Store on threaded brackets when not in use
|
- Periodically clean and lubricate threads with soap
|
| Operation |
- Rotate ends to adjust spry pattern
|
- Move "bar" up and down with your thumb, to increase / decrease the flow of water
|
| Nozzle (Tank Filler) |
|
| Maintenance |
- Store on threaded brackets when not in use
|
- Clean with bleach before filling a water tank
|
| Hose Stand |
- Made from 1 1/2" X 5" hemlock and 5/8" plywood, estimated cost $30
|
- Fastened with epoxy, galvanized bolts and lag bolts. Provided by the Nanaimo Yacht Club
|
- Stained and varnished, estimated cost $15
|
|
| Hose Bracket |
- Used existing steel bracket. Sand blasted and spray painted it with black epoxy
|
|
|
|
|
|
| Note: This Dock Hose is shared by the occupants of slip numbers H11, H12, H13, and H14. The occupants of these slips in the Fall of 2022, contributed to the cost of replacing this device. |
