| Back To Search Page |
|
Fairing and Painting the Hull | Back To Search Page | |
| Duratec Information (Spray on Filler) |
| Polyester Paste Information (Filler) |
| Endura Information (Hull Paint White First Coat) |
| Imron Information (Hull Paint White Second Coat) |
 |
|
|
 |  |
 |
 |
 |
Above, a
wood batten, covered with cello tape is used to fair the
cabin/hull joint. Filler is placed between the batten and the cabin
flange; when the batten is removed it leaves a crisp fair flange line. |
 Filler before initial fairing |
 After initial fairing |
 Port side initial fairing complete . Hull/cabin joint and bulwark cap faired and ready for finishing |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
After fairing first coat of Duratec |
| Second Coat of Duratec |
 |
 |
| After fairing second coat of duratec and masking in preparation for painting |
 |
 |
| Green Primer |
 Finishing Coat |
 |
 |
| Decided we didn't like the colour - sanded it down and did it again with Imron - final coat below Imron Information |
 |
    |
| With tarps removed |
| (Cap rail remains to be gel coated) |
 |
 |
| Cap Rail Gel Coated and Polished (small repair to be done on starboard side behind wheel house) |
041222 1155 11fairing the hull
